Table of Contents
Advertisement
2. Release the catch on the table leg brace and
fold the leg up against the bottom of the
table.
3. Remove the table from the wall support
bracket by lifting the end of the table. Then
lower the table to rest on the cleats attached
to each dinette bench.
4. Arrange dinette cushions to cover bed area.
To Revert to Dinette:
1. Replace the table onto the wall support and
lower the table leg.
APPLIANCES & INTERIOR FEATURES
2. Make sure that the table leg is secured into
the floor support bracket and the leg brace is
locked.
SLEEP NUMBER
by Select Comfort™
NOTE: Before Traveling - If you plan to travel
with your Sleep Number mattress into
mountainous regions, either (1) tempo-
rarily disconnect the mattress from the
pump hose to allow air to escape or (2)
partially deflate the mattress chamber.
(Change Sleep Number settings to 20 or
lower on both sides before traveling.)
Rapid changes in altitude will affect the
air pressure inside the mattress. The
chamber may be damaged if the pressure
becomes too great.
Unlike innerspring mattresses, your Sleep
Number bed can be personalized specifically to
your ideal comfort level. The dual-chamber mat-
tress gives you the ability to enter a different
Sleep Number for each side of the bed. Since no
two body types are the same, each sleep partner
should personalize their side of the bed with
their own Sleep Number.
SECTION 8
®
BED - Optional
8-19
Advertisement
Table of Contents
