Dinette/Bed Conversion; Couch Bed Conversion - Winnebago Minnie Winny 2004 Owner's Manual

SECTION 8
APPLIANCES & INTERIOR FEATURES
the brackets on the rear edge of the mattress for
easier access and exit.
Front Overhead Bunk
Shown with mattress sections in use position
Front Bunk Ladder
Shown hooked into mattress bracket
COUCH/BED CONVERSIONS
Continental Bed
To Convert Couch to Bed:
1. Remove the backrest cushions from the
couch.
2. Grasp the front edge of the couch and pull
upward and outward from the wall at the
same time.
3. Lift the front edge of the seat cushion and
unfold it toward the wall until it lies flat,
forming a sleeping surface.
8-18
To Revert to Couch:
1. Fold mattress forward from the wall to return
the seat cushions upright.
2. Pull the front of the couch upward and push
in toward the wall at the same time until
fully seated against the wall.
3. Place the backrest cushions in their original
locations.
Presto Bed/Shock Bed
To Convert Couch to Bed:
Pull the front edge of the couch seat upward
and outward from the wall while gently pushing
downward on the backrest until the cushions lie
flat. The bed is now ready for use.
To Revert to Couch:
Push the front edge of the seat toward the wall
while lifting upward on the backrest until the
couch is fully seated against the wall.

DINETTE/BED CONVERSION

To Convert Dinette to Bed:
1. Lift the seats and remove the seat support
'bumpers' to allow the seats to lie flush for
use as a bed. Do not lose bumpers because
you must refit them when reverting back to
dinette seat configuration.