Winnebago Minnie Winny 2004 Owner's Manual page 28

SECTION 2
DRIVING YOUR MOTOR HOME
Seat Recline Lever
Seat Position Adjustment Bar
(Lift to slide foward - back)
To slide seat front-back: Lift the seat adjustment
bar and use body pressure to adjust the forward-
rearward position of the driver seat. Release the
bar to lock seat in desired position.
WARNING
Do not adjust driver's seat while vehi-
cle is in motion.
After adjusting seat, always use body
pressure to make sure slide and
swivel locking mechanism have
engaged.
2-6
If your model has a dinette seat located di-
rectly behind the driver or passenger front seat,
the dinette seat back is hinged and can be folded
down to allow full use of the front seat reclining
feature. Simply remove the seat back cushion and
unlatch the bolt latches on both sides of the di-
nette seat as shown, then fold downard.
Dinette Seatback Latch
(Remove cushion and unbolt to fold down
Dinette seat fold down to allow front seat
reclining.
ARM REST ADJUSTMENT
The driver and co-pilot seat armrests may be
adjusted to rest at two different positions as
shown.
Position 1 (Normal) - This is the normal "de-
fault" position of the armrest, which is generally
used when the seat is in the upright position. If
the armrest has been lowered to position 2 and