Table of Contents
Advertisement
Electromagnetic Compatability (EMC)
The AA550 meets and exceeds the CE standard for EMC (EN60945).
These standards are intended to provide reasonable protection against
interference by other emission generating products on the boat.
However, compliance with these standards is no guarantee that inter-
ference will not occur in a particular installation. The installation in-
structions must be followed to minimise the potential for interference.
AA550 Use
It is the owner's sole responsibility to ensure the AA550 is installed,
used and maintained in a manner that will not cause accidents, per-
sonal injury or property damage. When using the AA550 the operator
must use safe boating practices and safe windlass and anchoring opera-
tion.
Before using the AA550 the operating instructions must be read and
understood and the AA550 must be calibrated and tested.
The AA550 makes anchoring less stressful but nothing can replace
good seamanship and safe boating practices.
The user of the AA550 must:
• use the windlass strictly according to the windlass manufacturer's
instructions;
• personally control and supervise all windlass and anchoring
operations; and
• always ensure the anchor is fully docked and secured before
moving the boat
The AA550 manufacturer and supplier accept no liability for personal
injury or property damage resulting from failure to follow the instal-
lation instructions or the use of the AA550 in a way that may cause
accidents or damage or that may violate the law.
ii
Hide quick links:
Advertisement
Table of Contents
