Oki OKIOFFICE 1200 Field Engineering Manual page 85

Unique Switch g:8 ∼ ∼ ∼ ∼ g:9 --- Factory use only
Unique Switch h:0 - Operation
Initial
Switch
Setting
7 0 First Dialing symbol when
pressing Dialing Options key
0: "−"
1: "−! "
6 1 LCD error message
0: Remains in LCD
1: Returns to standby
5 1 Buzzer/keypad volume
OFF
4 0 0
0
3 0 Priority of Speed Dial / Tel
Index key
0: Speed Dial
1: Tel Index
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only
Unique Switch h:1 - Operation
Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 RX document to polling
document
0: No
1: Yes
0 0 Factory use only
Unique Switch h:2 --- Factory use only
Adjust
Low Medium Maximum
0 1 1
1 0 1
Adjust
3-58
Usage/Comments
When set to "0", "−" will appear first when pressing
Dialing Options key.
When set to "1", "−! " will appear first.
After an error message has printed, the setting of
this switch determines if the error message will
remain in the display.
When set to "0", Speed Dial index will appear first
when pressing Speed Dial / Tel Index key.
When set to "1", Tel Index will appear first.
Usage/Comments
Retrieve the document received in the memory by
polling transmission.