Oki OKIOFFICE 1200 Field Engineering Manual page 206

10. Re-attach the rear cover of the machine.
However, do not secure the two places of the rear side of the rear cover. These places will be
secured with the screws (3 x 10 mm) included in the option cassette box. The remaining two screws
(3 x 8 mm) will be used in step 12.
Note: Do not forget to connect the speaker connector when attaching the rear cover of the
machine.
Note: Be sure to ensure no wire is trapped when reattaching the rear cover.
11. Re-attach the rear cover of the second cassette using two screws (3×10 mm) included in the option
cassette box and six mounting screws (3×8 mm) as shown in the illustration.
3x10mm screws
12. Pull out the first cassette, and then fix the machine and the second cassette using two screws as
shown in the illustration.
6-24