Oki OKIOFFICE 1200 Field Engineering Manual page 198

13. Connect the bi-directional parallel printer cable to the printer interface port of printer control PCB.
Note: Attach the ferrite core included in the printer control kit's carton box to the printer cable as
shown.
14. Snap the plug's wire clips onto the printer cable.
15. Connect the other end of the printer cable to the computer's parallel port.
16. If using the NIC, connect the printer to the network by using the network cable.
17. Attach the Function key label B to the one-touch cover.
18. Install the printer driver software. (Please refer to the operating instructions.)
EtherNet port Network cable
(10/100Base-T twist pair cable)
6-16