Oki OKIOFFICE 1200 Field Engineering Manual page 122

What you see on the LCD
Mirror Carriage Error
Mirror Locked
No Command
No Dept. Code
No Document Stored
No Drum
No Number Stored
No Passcode
No PIN Number
No Report
No Toner Cartridge
Not Allowed in Macro
Other Key Setting
Open Top Cover
Please Remove Paper
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover
Reset Document
Please Call Service
What it means/What to do
The mirror carriage of your machine has become inoperable.
The transport mode is not turned off.
Turn off the transport mode.
You pressed REVIEW COMMANDS to review upcoming commands, but
your fax machine had none stored.
You tried to turn on the department code setting but there are no
department codes stored in your fax machine.
Store at least one department code, then try again.
. . . or . . .
You entered incorrect department code at fax sending while the
department feature is on.
Enter correct department code.
You tried to print a document from memory, but your fax machine had
none stored.
The drum cartridge is missing or has not been properly installed in your
fax machine.
Please properly install the drum cartridge.
You selected an autodialer, batch box or F-Code box number for which
there is no fax (or phone) number programmed.
Either choose another number or dial a phone number directly from the
numeric keypad.
You tried to program a security feature, but there's no protection
passcode stored in your fax machine.
Store a protection passcode in your machine, then retry again.
You selected "Mode1" in the pin mask feature and tried to call an
autodialer number in which no PIN has been entered, or to call using
numeric keypad without PIN.
Enter a PIN, then try again.
You requested an activity journal or confirmation report, but your fax
machine has no record of any fax jobs having occurred.
The toner cartridge is missing or has not been properly installed in
your fax machine. Please properly install the toner cartridge.
During macro registration, you pressed the key which cannot be
registered in Macro, such as MONITOR/CALL key or SECURITY
RECEPTION key.
You tried to enter the same function which is already stored in other Soft
key.
Store the different function.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and remove the jammed paper
carefully.
Either your document wasn't inserted correctly, or the fax to which you're
sending can't handle the document's page length.
Reset the page and try again.
The printer unit of your fax machine has become inoperable.
See page 4-21.
4-15