Oki OKIOFFICE 1200 Field Engineering Manual page 123

What you see on the LCD
Please Replace Drum
Please Replace Toner
Please Supply Paper
Please Wait
Polling In Use
Printer In Use
Protect Doc. Stored
Ration must be 100%
Scanner In Use
SecurityRx is Off
Sub-address In Use
Toner Low
Too Many Characters
Too Many Locations
Too Many Steps
Unable to Reduce
Use FBS Glass
What it means/What to do
Your drum cartridge has reached the limit of its design life. Your machine
cannot print until the drum cartridge is replaced.
Please replace the drum cartridge.
Your toner cartridge is empty. Your machine cannot print until the toner
cartridge is replaced.
Replace the toner cartridge.
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass tray.
Your fax machine's printer is either warming up or busy.
Please wait until the fax is finished printing and then re-try your command
or operation.
You tried to store the polling document in your fax machine, where one
already had been stored.
Wait for the fax to complete the regular polling operation or delete the
stored document, then try again.
The command you're trying to enter requires the use of the printer, which
is already in use.
Wait for the fax to finish printing, then try again.
A received document was in your fax's memory when you tried to turn off
the security reception passcode.
Print the received document from your fax's memory, then retry the
desired operation.
You cannot set the magnification ratio in Negative/Positive copy.
Set the magnification ratio to 100 % to use the Negative/Positive copy.
The command you're trying to enter requires the use of the scanner,
which is already in use.
Wait for the fax to complete the scan, then re-try the desired command.
You tried to turn the security reception on using a Soft key which is
assigned to set the security reception to on or off, but security reception
setting has not set to on.
To turn on or off the security reception using a Soft key, first set the
security reception setting to on.
You tried to enter a sub-address identical to one already being used in
another F-Code box.
Enter a different sub-address.
Your fax machine is almost out of toner.
You attempted to enter too many numbers or other characters in the
current operation.
Press CANCEL to delete the extra characters, then try again. You may
wish to review the operation's appropriate instructions.
You tried to enter too many numbers for a broadcast. You can enter up to
200 autodialer numbers and up to 30 numbers entered through the
numeric keypad.
Press CANCEL to delete the extra numbers and then try again.
You tried to enter too many steps for a macro. You can enter up to 60
steps into a macro key.
In the reduction copy using the ADF, if the calculated ratio is smaller than
minimum reduction ratio (50%), this message will appear and you cannot
make the reduction copy.
Use the FBS glass, however parts of the image might not be copied.
You tried to enlargement copy using the ADF. Your machine cannot
enlargement copy from the ADF.
Please set your document on the FBS glass to make the enlargement
copy.
4-16