Cannot Start
If the NLS-PT80 cannot be turned on, please check that:
The battery is installed properly with enough electricity
The USB cable is pulled out
No Display
If the screen does not display, please check that:
The power is on and NLS-PT80 is not under hibernation
The battery is connected properly with enough electricity
The downloaded applications are compatible
Low Battery
If the battery is alarmed low level after just a short time of use, please check that:
The battery is fully charged
The battery is under good condition. If the battery fails to work, please replace one.
NLS-PT80 Crash
If the NLS-PT80 crashed, please:
Press the RESET button on the back of NLS-PT80 with a pin
No LED Indicator
If no LED is lighted on during charging:
Please ensure the power adapter of NLS-PT80 or cradle is connected correctly
USB Connection
If the USB communication cannot work:
The USB cable may not be connected correctly
Please check whether the USB configurations of NLS-PT80 is correct
WIFI Connection
If WIFI cannot be connected:
Please check whether the battery has enough electricity.
Please ensure the wireless network covers where you locate
Please rescan the network and reconnect the WIFI
Please check the configurations of network, including SSID (SSID with any Chinese symbol is not supported), encryption
and password
Chapter V Troubleshooting
38