Furuno Felcom 250 Operator's Manual page 78

3. SETTINGS FOR HANDSET
If you select the [DHCP] at the step 7, the [Manual set.] screen appears. Go to
step 16.
9. With the [IP address] field selected, press the Enter key.
10. Enter the IP address for this unit, and press the Enter key.
11. Press
12. Enter the Subnet mask and press the Enter key.
13. Press
14. Enter the default gateway (IP address of the router) and press the Enter key.
15. Press the
16. Press 2 to select the [DNS] menu to show the [DNS obtain] screen.
17. Press
[Static]: Set Primary and Secondary DNS server addresses manually.
[DHCP]: Obtain DNS server address automatically from the DHCP server.
18. Press the Enter key. Do one of the following depending on selection made at step
17.
If you select the [static] at step 17, the DNS entry screen appears. Go to step 19.
If you select the [DHCP] at step 17, the [Manual set.] screen appears. Go to step
24.
3-16
Static IP factory default settings
to select the [Subnet mask] field, and press the Enter key.
to select the [Def. gateway] field, and press the Enter key.
key to return to the [Manual set.] menu.
or to select the method for obtaining the DNS server address.
DNS factory default settings