Web; How To Connect/Disconnect To/From The Internet - Furuno Felcom 250 Operator's Manual

2. HANDSET OPERATIONS
2.4

Web

You can view web pages on the handset by using Standard IP (Best effort) packet
communications service. Service charge is based on the amount of data volume, not
connection time.
Note: The handset can start from Standard IP packet service. However, when using
Streaming IP data packet service with the Web Software, the handset uses streaming
IP service. The charge for Streaming IP service is based on connection time, so it is
not advised to view web pages from the handset. Disconnect from the internet and re-
connect to use Standard IP.
2.4.1

How to connect/disconnect to/from the Internet

Note: If the IP address of the handset is not set by web software (the standby display
shows "D: No permission"), you cannot connect to the internet. See page 6-16.
How to connect to the Internet
If you are already connected to the Internet via the Web software (Idle screen displays
"D: Connected"), the following procedure is NOT necessary.
Do the following to connect to the Internet:
1. At the idle screen, press the
2. Press 5 to select [Std. IP].
3. Press
"Connect..." appears. When connected, the message "Completed." is displayed.
Note: If connection cannot be established, the message "Failed." appears.
4. Press the
ed".
2-26
to select [Yes], and press the Enter key. While connecting, the message
key to close the menu. The idle screen now displays "D: Connect-
key to open the [Web top] menu.