Furuno Felcom 250 Operator's Manual page 154

6. WEB FUNCTIONS
3. Click the [Connect] button to start the data connection. The task bar shows [Con-
nected to ***] (*** is the name on the icon for PPPoE connection) if you are con-
nected to the internet.
4. To disconnect the data connection, click the icon for PPPoE connection (
the task bar.
5. Click the [Disconnect] button to disconnect the data connection. Closing the ap-
plication does not disconnect the line.
How to connect to the internet via PPPoE (for Windows
The procedure outlined below uses screenshots from the Windows
tem. Windows
vary slightly.
1. Access the [Control Panel] on your PC.
2. Double-click [Network and Internet], then double-click [Network and Sharing Cen-
ter].
For Windows
3. Left-click [Connect to a network]. A list of available networks is displayed.
6-40
FELCOM 500 Dial Status
®
8 users should be aware that their displayed screens and menus may
®
8, select [View network status and tasks].
) on
® ®
7/Windows 8)
®
7 operating sys-