Handset Operations; Handset; How To Make A Call - Furuno Felcom 250 Operator's Manual

2.

HANDSET OPERATIONS

2.1

Handset

You can call someone on land or ship-to-ship from the handset. This unit allows the
handset to be used at the same time as the internet.
2.1.1

How to make a call

There are three methods to make a call:
1) Enter the number (or short dial number) of the party to call.
2) Select a number from the call History.
3) Select a number from the Contacts list.
You can call someone on the idle screen indicated "V: Ready / 0".
How to enter a number
To enter a number from the handset, do the following:
1. Remove the handset from the cradle, and enter the number from the idle screen:
Land: [00], country code, subscriber number.
Ship-to-ship (Inmarsat terminal): [00], [870] (ocean area code), Inmarsat Fleet-
broadband number.
Internal call: 4 digit inter-line number
Short dial:[0], short dial number (two digits). Where there is an Access code or
Bearer assigned, [Access code/Bearer number], [*], [0], short dial number.
Note 1: To erase a number that is entered wrong, press the CLR key.
Note 2: There are two voice services, "4kbps AMBE+2" and "3.1kHz Audio". Se-
lect the service to use by entering [1][*] or [2][*] before the phone number. If noth-
ing is input before the number, "4kpbs AMBE+2" is used by default. Depending on
SIM card contract, "3.1kHz Audio" cannot be used. Contact the company which
issues your SIM card for details.
XXXXXX
2-1