Data Connection Using Web Software - Furuno Felcom 250 Operator's Manual

1. BASIC OPERATION
4. To delete one item, press 2 [Delete]. To delete all items press 3 [Delete all]. One
of the following confirmation screen appears:
5. Press
"Deleted" or "All deleted" displays.
1.6

Data connection using Web software

Below are the procedures to connect to the internet. Refer to chapter 5 for how to ac-
tivate the Web software and the details of data connection.
How to connect to the internet
Follow the procedure shown below to connect to the internet.
1. Click [Main] in the menu bar.
Menu Bar
*: Below will be shown when the equipment cannot connect to/is disconnected
from the internet.
• "---" (cannot be used): When the equipment is not logged into the satellite sys-
tem.
• "No permission" (internet connection is not permitted): The IP address of PC is
not registered to the user list. (Refer to page 6-16 for the details.)
1-12
[Delete] selected
to select [Yes], and press the Enter key. When complete, the message
[Delete all] selected
See "IMPORTANT NOTICES" (page i).