Furuno Felcom 250 Operator's Manual page 137

VPN pass-through screen
Click [VPN pass-through] on the group setting screen to show the VPN pass-through
setting screen. Set the screen according to your system.
Item
IPSec Place a [ ] by IPSec pass-through to activate.
PPTP Place a [ ] by PPTP pass-through to activate.
Apply button Click to apply changes.
Cancel button Click to ignore changes.
Common settings screen
On the menu bar, click [Settings], [Network settings], [WAN], [Common settings] to
show the Common settings setting screen.
Item
Use / unuse Check [ ] to use Upnp. Not active in initial setting.
Group Select a group to use from a list box.
Apply button Apply settings.
Cancel button Restore previous settings
Display user list
On the menu bar, click [Settings], [Network settings], [WAN], [User list] to show the
user list screen.
Item
Group
User (IP address)
Description
Description
Description
Show group name.
Display IP address of a user registered in a group. If
there is no user registered, the User column is blank.
6. WEB FUNCTIONS
6-23