Password - Furuno Felcom 250 Operator's Manual

2. Click [Data connection] in the sub menu to show the data connection display.
3. Click the [Connect] button of the service to use.
When connecting, the message "Now connecting..." is displayed. When connect-
ed, the message "***connection success." appears.
4. Click [OK] to close the message.
When connected to the internet, the connection list is displayed as shown below.
5. Open the desired application software and begin data communication.
How to disconnect from the internet
Do the following to disconnect from the internet:
1. Click [Main] in the menu bar.
2. Click [Data connection] to show the [Data connection] screen.
3. Click [Disconnect] for the services to disconnect. When disconnecting, the mes-
sage "Now disconnecting..." is displayed. When disconnected, the message
"***disconnection success." is displayed. (***: Service and application)
4. Click the [OK] button to close the message. The [Status] field displays "Not Con-
nected", the [Operation] button shows "Connect".
1.7

Password

Refer to the following table for information on passwords:
Handset Operation
Password
Delete all items and display specific
menus.
*1
password
SMS pass- When accessing SMS menu.
*1, *2
word
SIP password Authentication password for SIP server.
When you change the SIP password
you must also change the extension
line password to the same, by WEB
software.
1. BASIC OPERATION
Use
Password
Update
Refer to
paragraph 3.5.4.
Refer to
paragraph 6.1.13.
Refer to
paragraph 3.5.3.
1-13