Furuno Felcom 250 Operator's Manual page 112

5. WEB SOFTWARE
4. To arrange the log in ascending or descending order, do the following:
1) At the top of the log list, click either [Date], [Duration], [KBytes], [Service], [La-
bel], or [Code].
2) Click the item again to change between
der.
5. To display the detailed log, click the [Detail] button.
To return to the Data connection log, click the [Back] button.
Item
Date
Duration
kbyte
Service
Label
APN
Event code/ mes-
sage
Latitude
Longitude
Signal strength
6. To save the log to a CSV file, click the [Save CSV] button. (See paragraph 5.9.2
for complete information.) The Data connection log additionally records the APN,
latitude and longitude, CN0 and Message (only shown when there is an event
code).
Note 1: You can find the latitude and longitude at the time a call ended and RX signal
level by putting the cursor on the date on the Data connection log display. If there is
no data (old log, no GPS data) "--°--'--", ---°--'--" appears.
Note 2: You can show the details of an event code by clicking the event code on the
Data connection log display. Click the [Back] button to return to Data connection log
display.
5-28
appears beside the selected item.
Default
bgan.inmarsat.com
Displays the date when the communication starts.
Displays the period for communication.
Displays the total amount of data during connection. (In the stream-
ing connection, "- -" appears.)
Displays the communication service.
Displays Group name/Session name at saving the log.
Access Point Name
Displays the event code and messages. When no event code, "- -"
appears.
Displays the position (Lat) at the time a communication ended.
Displays the position (Lon) at the time a communication ended.
Displays the RX signal level (CN0) during communication.
(ascending) or
Description
(descending) or-