SmartWatch DVR Operation Manual
3.4 Channel-zero Encoding
Purpose:
Channel-zero encoding decreases the bandwidth requirement without affecting image quality to enable remote
real time viewing of multiple channels over a web browser / CMS (Client Management System) software.
Steps:
1.
Enter the Live View Settings interface.
Menu> Configuration> Live View
2.
Select the Channel-Zero Encoding tab.
3.
Check the checkbox after Enable Channel-Zero Encoding.
4.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate.
After enabling Channel-Zero encoding, all channels can be viewed remotely one screen.
Figure 3.9 Live View- Channel-Zero Encoding
35