Table of Contents
Advertisement
SmartWatch DVR Operation Manual
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Operating the Setup Wizard:
1.
Select the system language from the drop-down menu. The default resolution is 1280×1024/60Hz.
Click Apply to save the resolution settings.
2.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup wizard.
You can also click Cancel to exit the Setup Wizard, or use the Setup Wizard next time by leaving the
"Start wizard when DVR starts?" checkbox checked and exit.
3.
Click Next button on the Wizard window to enter the Login window, as shown in Figure 2.3.
1)
Enter the admin password. By default, the password is 12345.
2)
To change the admin password, check the New Admin Password checkbox. Enter the new password
and confirm the password in the given fields.
Figure 2.1 Start Wizard Interface
Figure 2.2 Start Wizard Interface
22
Hide quick links:
Advertisement
Table of Contents
