Setting Motion Detection - Smartwatch H20SWDVR4R Operation Manual

SmartWatch DVR Operation Manual

8.1 Setting Motion Detection

Steps:
1. Enter Motion Detection interface and choose a camera you want to set motion detection up on.
Menu> Camera> Motion
2. Set motion detection area and sensitivity.
1) Check the checkbox of Enable Motion Detection to enable motion detection, use the mouse to draw
detection area(s) and drag the sensitivity bar to set sensitivity.
2) Click the icon of Handling to set alarm response actions.
3. Click Trigger Channel tab and select one or more channels which will start to record or enter full-screen
mode when a motion alarm is triggered.
Figure 8.3 Set Trigger Camera of Motion Detection
Figure 8.1 Motion Detection Setup Interface
Figure 8.2 Set Detection Area and Sensitivity
106