SmartWatch DVR Operation Manual
10.5 Checking HDD Status
Purpose:
You can check the status of the installed HDDs.
Checking HDD Status in HDD Information Interface
Steps:
1.
Enter the HDD Information interface.
Menu > HDD>General
2.
Check the status of each HDD which is displayed on the list.
If the status of HDD is Normal or Sleeping, it is working normally. If the status is Uninitialized or
Abnormal, please initialize the HDD before use. And if the HDD initialization is Failed, please replace it with
a new one.
Checking HDD Status in System Information Interface
Steps:
1.
Enter the System Information interface.
Menu > Maintenance > System Info
2.
Click the HDD tab to view the status of HDD displayed on the list.
Figure 10.18 View HDD Status (1)
Figure 10.19 View HDD Status (2)
146