SmartWatch DVR Operation Manual
1.1 Front Panel
The front panel of the H20SWDVR4R, H20SWDVR8 & H20SWDVR16 are shown in Figure 1.1:
Figure 1.1 Front panel of H20SWDVR4R, H20SWDVR8 & H20SWDVR16
Table 1.1 Description of H20SWDVR4R, H20SWDVR8 & H20SWDVR16 Front Panel Features
No.
Name
1
POWER
2
STATUS
3
Tx/Rx
4
IR Receiver
5
USB Interface
The front panel of the H20SWDVR16R & H20SWDVR32R is shown below:
Figure 1.2 Front panel of H20SWDVR16R & H20SWDVR32R
Table 1.2 Description of H20SWDVR16R & H20SWDVR32R Front Panel Features
No.
Name
1
POWER
ON/OFF
2
IR Receiver
3
USB
4
DVD-ROM
POWER
READY
5
STATUS
Function Description
POWER indicator turns green when DVR is powered up.
STATUS indicator lights in red when HDD is reading/writing.
Tx/Rx indictor blinks green when network connection is functioning
properly.
Receiver for IR remote.
Connects USB mouse or USB flash memory devices.
Function Description
Power on/off switch.
Receiver for IR remote control.
Connect to USB mouse or USB flash memory devices.
Slot for DVD-ROM.
Power indicator lights in green when DVR is powered up.
Ready indicator is normally green, indicating that the DVR is functioning
properly.
Indicator turns green when DVR is controlled by an IR remote control with an
address within 1~254;
Indicator turns red when the SHIFT button is used;
Indicator does not light when the DVR is controlled by a keyboard or by the
IR remote control with an address of 255;
Indicator turns green when the DVR is controlled by an IR remote control
(with an address within 1~254) and keyboard at the same time , and the
SHIFT button is not used;
Indicator turns orange : (a) when the DVR is controlled by an IR remote
11