Configuring Multicast; Configuring Rtsp - Smartwatch H20SWDVR4R Operation Manual

SmartWatch DVR Operation Manual
4. Click the Apply button to save and exit the interface.

9.2.7 Configuring Multicast

Purpose:
A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the
IP address ranging from 239.252.0.0 to 239.255.255.255.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the More Settings tab to enter the More Settings interface.
3. Set Multicast IP. When adding a device to the CMS (Client Management System) software, the
multicast address must be the same as the device's multicast IP.
4. Click the Apply button to save and exit the interface.

9.2.8 Configuring RTSP

Purpose:
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in entertainment and
communications systems to control streaming media servers.
Steps:
1. Enter the Network Settings menu by clicking Menu > Configuration > Network.
2. Select the More Settings tab to enter the More Settings menu.
Figure 9.20 Configure Alarm Host
Figure 9.21 Configure Multicast
127