Table of Contents
Advertisement
SmartWatch DVR Operation Manual
10.4 Configuring Quota Mode
Purpose
Each camera can be configured with an allocated quota for the storage of recorded files.
Steps
1.
Enter the Storage Mode interface.
Menu > HDD > Advanced
2.
Set the Mode to Quota.
The device must be rebooted to enable the changes to take effect.
3.
Enter the storage capacity in the text field of Max. Record Capacity (GB).
4.
You can copy the quota settings of the current camera to other cameras if required. Click the Copy
button to enter the Copy Camera menu, as shown below.
5.
Select the camera (s) to be configured with the same quota settings. You can also click the checkbox
of Analog to select all cameras.
6.
Click the OK button to finish the Copy settings and return to the Storage Mode interface.
7.
Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of the HDD for recording.
Figure 10.15 Storage Mode Settings Interface
Figure 10.16 Configure Record Quota
Figure 10. 17 Copy Settings to Other Camera(s)
145
Hide quick links:
Advertisement
Table of Contents
