Smartwatch Eco Installation Manual
Hide thumbs
Also See for Eco:
- Installation & operation manual (16 pages) ,
- Quick user manual (20 pages)
Related Manuals for Smartwatch Eco
Summary of Contents for Smartwatch Eco
-
Page 1: Installation Manual
® SmartWatch Eco/Eco Compact Digital Video Recorders ® SmartWatch ® SmartWatch Eco Compact Installation Manual... - Page 2 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE: This equipment has been tested and found to comply with the limits for a class digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Table Of Contents
Front Panel Controls ..............................5-6 SmartWatch Eco Compact..........................5 SmartWatch Eco ..............................6 Rear Panel Connections ............................7 - 11 SmartWatch Eco Compact (4 channel) ........................7 SmartWatch Eco Compact (8 channel) ........................8 SmartWatch Eco (4 channel) ..........................9 SmartWatch Eco (8 channel) ..........................10 SmartWatch Eco (16 channel) .......................... -
Page 4: Box Contents
Box Contents 1. DVR 2. Quick Reference Guide 3. IR Remote Control 4. Batteries x 2 5. CD 6. Power Adaptor 7. Power Cord 8. 25 Way Connector (8 / 16 channel models only) -
Page 5: Front Panel Controls
SmartWatch Eco Compact - Front Panel Controls 1 2 3 4 Power LED Power status LAN LED Connected to the internet (green). Remote user logged in (red). Play LED DVR is in playback mode Record LED DVR is recording IR Sensor... -
Page 6: Smartwatch Eco
SmartWatch Eco - Front Panel Controls DVD Writer DVD-RW backup device In Setup mode, press to move cursor down. In Playback mode, press to stop. ■ ▼ / ▲ / SLOW In Setup mode, press to move cursor up. In Playback mode, press to slow down. -
Page 7: Rear Panel Connections
SmartWatch Eco Compact (4 channel) - Rear Panel Connections DC 12V DC 12V input VIDEO out Main/Spot monitor output (BNC) VIDEO in Camera inputs AUDIO in Audio input AUDIO out Audio output Main monitor output (VGA) USB port for connecting mouse... -
Page 8: Smartwatch Eco Compact (8 Channel)
SmartWatch Eco Compact (8 channel) - Rear Panel Connections Main monitor output (VGA) DC 12V DC 12V input VIDEO out Main/Spot monitor output (BNC) VIDEO in Camera inputs AUDIO in Audio input AUDIO out Audio output RS-485 RS-485 port for PTZ control... -
Page 9: Smartwatch Eco (4 Channel)
SmartWatch Eco (4 Channel) - Rear Panel Connections SPOT VIDEO in Camera inputs AUDIO in Audio input Main monitor output (VGA) DC 12V DC 12V input Video output Main/Spot monitor output (BNC) AUDIO out Audio output NTSC/PAL Switch between NTSC and PAL format (make sure the switch is in the PAL position) -
Page 10: Smartwatch Eco (8 Channel)
SmartWatch Eco (8 Channel) - Rear Panel Connections SPOT VIDEO in Camera inputs AUDIO in Audio inputs AUDIO out Audio outputs Ethernet port Main monitor output (VGA) DC 12V DC 12V input Video output Main/Spot monitor output (BNC) USB port for mouse connection... -
Page 11: Smartwatch Eco (16 Channel)
SmartWatch Eco (16 Channel) - Rear Panel Connections SPOT 10 11 Video output Main/Spot monitor output (BNC) VIDEO in Camera inputs AUDIO in Audio inputs External I/O External I/O port (see below for pin layout) NTSC/PAL Switch between NTSC and PAL format (make sure the switch is in the PAL position) -
Page 12: Remote Control Functions In Live Mode
Remote Control Functions In Live Mode Press DVR1 on the remote control to enable it Button Description Start or stop recording (depending on schedule setup). PLAY Start playback (from start of current hour). LOCK Lock DVR controls (password required). 1,2,3,4... Select channel. -
Page 13: Mouse Functions In Live Mode
Mouse Functions In Live Mode Right-clicking the mouse anywhere on the screen will bring up the following icons Icon Description Resting the cursor on this icon will bring up the following four menu icons. Enter setup menu. Enter search menu. Enter backup menu. -
Page 14: On-Screen Graphical Icons In Live Mode
On-Screen Graphical Icons In Live Mode Icon Description DVR is recording. Live audio is on. Live audio is off. Motion is detected. Sensor is triggered. Video loss detected. USB device detected. DVD burner is detected. Connected to the LAN cable. Film: Normal recording. -
Page 15: Playback Mode
Playback Mode To enter playback mode: • Press PLAY on the front panel • Press PLAY on the remote control • Click when using the mouse Remote Control Functions In Playback Mode Button Description ENTER/MODE Switch between full screen, quad, 9-channel and 16-channel displays Pause playback MENU / II PLAY... -
Page 16: Ptz Control
PTZ Control To enter PTZ mode: • Press PTZ on the remote control • Click when using the mouse Remote Control Functions In PTZ Mode Button Description ▲ / SLOW Move PTZ up. ■ ▼ / Move PTZ down. ◄ / ◄◄ Move PTZ to the left. -
Page 17: Main Menu Setup
Main Menu Setup To enter the DVR menus, a user name and password are required. The default password for the ‘Admin’ is ‘123456’. Virtual Keyboard Item Description Switch between capital and small letters. Switch between numbers and letters. Press to cancel the setup, and re-choose the login account. Delete the last character. -
Page 18: Record Setup
1. Record Setup Item Description Stop - When the HDD is full the unit will stop recording. HDD Full Overwrite - The DVR will overwrite, when the HDD is full (default setting). OSD position X X position for OSD. OSD position Y Y position for OSD. -
Page 19: Event Setup
2. Event Setup Item Description Motion Setup Enter to set up motion detection. Sensor Setup Enter to set up sensor detection. 2.1. Motion Setup Item Description Alarm Duration (Seconds) The alarm time in seconds when motion is detected (buzzer / relay). Enable/Disable popup function all channels (across channels). - Page 20 2.1.1. Motion Area Setup The screen is divided into 16x21 divisions: areas of detection are transparent, masked areas are in red. At default, all areas are selected. Item Description Mask Mouse Selection Use mouse to select area. All Area Detection Select the full screen.
-
Page 21: Schedule Setup
3. Schedule Setup Enter to configure recording schedule. There are a total of 50 schedules You can configure 50 holidays in total Item Description Page Each page provides 10 schedules for setup. 5 pages in total. Holiday Setup Enter to setup holiday, up to 50 days, other than weekends. View Event/ Motion/ Sensor Setup Normal/ Motion / Sensor Setup –... -
Page 22: Camera Setup
4. Camera Setup Item Description 1~16 Select channel to configure. Mask Enable/Disable mask function in LIVE mode. Sharpness Adjust Sharpness (Default – 1). Brightness Adjust Brightness (Default – 128). Contrast Adjust Contrast (Default – 100). Chroma(U)/(V) Adjust Chroma (Default – 128). Name Enter camera name. - Page 23 5.1. Permission Setup Users can be configured with different permissions. Option Description Password Expiry Date Set up expiry date for password. Setup Allow access to setup menu. Allow PTZ control. Utility Allow access to utility menu. Network Allow remote access. Playback Allow access to search / playback.
-
Page 24: Networking Setup
6. Networking Setup Item Description Setup network connection: (DHCP-LAN-ADSL). Connect type HTTP Setup Enter to set up HTTP. DDNS Setup Enter to set up DDNS. Mail Setup Enter to set up email. 6.1. Connecting To A Network There are three ways to connect to the network as follows. 6.1.1. - Page 25 6.1.2. LAN Select LAN for network connection, the following information is required. Item Description IP Address Enter IP address provided by ISP. Subnet Mask Enter IP address of Subnet Mask provided by ISP. Gateway Enter IP address of Gateway provided by ISP. Enter DNS address provided by ISP.
- Page 26 6.2. HTTP Setup Item Description Check to enable the HTTP server. Users can remotely access the DVR over the network if the HTTP Enable HTTP Server function is activated. Port Enter a valid port value from 1 up to 65000. The default value is 80. Auto Assign each channel with its maximum transmission FPS.
- Page 27 6.4. Mail Setup Configure email notification on video loss, sensor trigger or motion detection. Item Description Enable E-mail Notification Check the box to enable/disable E-mal Notification function. SMTP Server Enter SMTP Server name (varies according to IP). User Name Enter User Name. Password Enter Password.
-
Page 28: Ptz & Rs485 Setup
7. PTZ and RS485 Setup Configure PTZ cameras. Item Description Enable PTZ Enable/Disable PTZ function per channel. Protocol Select the protocol. PTZ ID Set the PTZ ID. Baud Rate Select the Baud Rate: 2400, 4800, 9600,19200 RS-485 ID For future development. RS-485 Baud Rate For future development. -
Page 29: System Setup
8. System Setup Item Description DVR Name DVR name to be displayed when remotely connected. DVR Location The location of the DVR will be shown when users login from a remote location. Language DVR language. Default ID is 1. Please press DVR1 on the remote control to enable it. - Page 30 8.2. Date / Time Setup Item Description Hour Format 12 / 24 Hour display. Date Format MM-DD-YY / DD-MM-YY / YY-MM-DD. Date/Time Position Select the position for Date and Time. Change Date & Time Set up DVR Date and Time. Time Zone Setup Set up GMT and Daylight Saving Time.
- Page 31 8.2.2. Time Zone & Daylight Saving Time Setup Set up time zone and daylight saving times. Item Description Select Time Zone Enter to modify GMT from GMT- 13 to GMT+ 13. Daylight Saving Time Turn on/ off Daylight Saving Time. 8.2.3.
- Page 32 8.3. Buzzer & Relay Setup Item Description Key Tone Enable/Disable keystrokes. Buzzer Enable/Disable buzzer operation on sensor, motion and video loss (Video Loss) events. Relay Enable/Disable the RELAY OUTPUT on sensor, motion and video loss events. 8.4. Spot Setup Select duration each channel Select to enable spot should be displayed monitor option...
-
Page 33: Utility Setup
9. Utility Setup Item Description HDD Initialization Enter this menu to format (initialize) HDD. Please note that all recorded data will be deleted. USB Initialization Enter this menu to format / initialize a USB flash drive. System Recovery Restore system default values. Reset System Events This will clear the event log. -
Page 34: Backup Mode
Backup Mode To enter backup mode: • Press BACKUP / ESC on the front panel • Press BK-UP / ESC on the remote control • Click when using the mouse Data can be backed up to a USB storage device or to a CD/DVD (on supported models) Item Description From... -
Page 35: Search Mode
Search Mode Event Search: The DVR will automatically log events with event type, time and additional information (e.g. channel, user). If there is recorded data for an event, a yellow signal ( ) will be displayed on the left side of event information. Press ‘Enter’, or left click your mouse to playback the recorded data. -
Page 36: Time Search
Time Search: Time search will allow you to search for data from a specific date and time. Press ‘Enter’ or left click on the desired date (note that dates with recorded data are marked with a red square). The time bar will now load. Now enter the required time. -
Page 37: Remote Software Installation And Setup
Remote Software Installation and Setup 1. Software Installation ‘DVR Remote Desktop’ will allow you to remotely monitor, playback, backup and configure the DVR . Note: The operating systems currently supported are Windows XP, Windows Vista, and Windows 7. Step One: The software can be installed from the CD provided or else when connected to the DVR via Internet Explorer. Step Two: Windows will display the following window. -
Page 38: How To Remotely Monitor, Playback, Backup And Configure Via Internet Explorer
Step Five: When the software is installed, the following icon will be displayed on the desktop: Step Six: When running the software the following login screen is displayed. Enter the DVR IP address, the port (default: 80), the user name (default: admin) and password (default: 123456). You are now connected to the DVR. -
Page 39: System Requirements For Dvr Remote Desktop
Step Three: Click on “Internet Explorer 6, 7, and 8”to start downloading the software. Note - There will be an IE connection security issue when clicking this link for the first time. Please refer to appendix 2 for Remote Monitoring IE ActiveX Control Installation instructions. Step Four: DVR images appear. -
Page 40: Specifications
Specifications Eco Compact Eco Compact 4 Channel 8 Channel 4 Channel 8 Channel 16 Channel Product Code I23SWEC04F I23SWE08F I23SWE04 I23SWE08 I23SWE16 Inputs Video Outputs 1 x BNC, 1 x VGA Inputs 1 x RC A 4 x RC A... -
Page 41: Cms Installation And Usage Guide
CMS Installation And Usage Guide 1. CMS Installation 1.1. System Requirements: • Intel Pentium 4 processor or equivalent. • Microsoft Windows Vista; Windows XP; Windows 2003 Server. • 512MB RAM or above. • 20MB HD space. Recording and image capturing require extra space for storage. •... -
Page 42: Cms Software
2. CMS Software Log in to CMS with the default account and password (admin). 2.1. CMS Login and Environment To enter CMS, the administrator’s user name and password are required. The defaults are ‘admin’ and ‘123456’. After login, the following image shows on your screen: DVRs, Groups &... -
Page 43: Dvrs, Groups & Events
3. DVRs, Groups & Events Icon Description View list of logged in DVR / Group. View Logs: list all the event information from the DVR. 3.1. View DVR / Group List Single left click on ‘DVR’ or ‘Group’ to expand/collapse the entire DVRs and groups list. -
Page 44: Local Pc Information And Control
4. Local PC Information and Control Located at the left lower corner of the screen: Icon Function Description HDD info Shows the percentage of available space. Allows the operator set the recording directory. Recording Directory (Default is C:\Program files\iCMS) Allows the operator set the capacity size of the recording space locally Recording Cycle (minimum is 10MB). -
Page 45: Audio Control
5.1. Audio Control In live mode, you can turn on/off the audio signal of Ch1~Ch4: Audio signal is On Audio signal is Off Turn on/off by clicking on the graphical icon. Please note, only one channel’s audio signal can be turned on at any one time. 5.2. - Page 46 5.3. PTZ Control In the main display, right clicking on a camera will display the PTZ control panel. Icon Description 8 direction key Rotate the PTZ. ZOOM+ : Zoom in. ZOOM- : Zoom out. FOCUS+ : Focus in. FOCUS- : Focus out. Set PTZ Preset Set up 16 preset N.
-
Page 47: Operation Bar
6. Operation Bar 10 operations listed as below: Icon Description User Administration. Please see “6.1 User administration”. DVR Administration. Please see “6.2 DVR Administration”. Group Administration. Please see “6.3 Group Administration”. eMap Administration. Please see “6.4 eMap Administration”. Remote Playback. Please see “6.5 Remote Play”. HDD Playback. - Page 48 6.2. DVR Administration This is where the operator adds, deletes, or edits DVRs with the CMS software. • Name: DVR Name (Unique) • Model: DVR Model − Generic: For General Models − Generic MainStream: For DualStream Model − DUAL SDVR: For MPEG4 2U Models •...
- Page 49 4. Click “OK” to confirm the selection. 5. Select a display / division window for the group. 6. Drag the channel from the lower left panel into the preferred display location. 7. Click “OK” to save setup. 6.4. eMAP Administration An eMap can be configured if geographical locations are relevant.
- Page 50 6.5. Remote Play Select remote play to view video images from a remote DVR. Select Division Select DVR Icon Description Start playing. Pause. Rewind. Fast forward. Select how many minutes / seconds are needed for viewing. Press the right button to start playing...
- Page 51 6.6 HDD Playback The operator can play back data from a HDD connected to the CMS. 6.7 File Playback The operator can playback recorded .irf files by using the “File Play” option in CMS. Icon Description Start Playback. Pause. Stop playback. Rewind.
- Page 52 6.8 Event Playback Event recordings from the DVR can be played back on the CMS software. Steps: 1. Select the required DVR and display mode. 2. Select the required date. 3. Double click an event and play back will start. 6.9 Snapshot Data The operator can view all snapshots taken in the CMS software.
-
Page 53: Appendix 1: I-Dvr.net Registration
“Logon”. Step 2: After logging in successfully, enter a host name. For example, using ‘smartwatch’ as the host name will make the address ‘smartwatch.i-dvr.net’. Now enter the current IP address of the DVR. - Page 54 Step 4: Enter DVR →Main Menu → Network Setup → DDNS. Activate DDNS functions and input related information. Enable DDNS As per CD Step 5: Back to the i-dvr.net, on this page by pressing "F5: Refresh", IP will automatically be updated with the latest IP address.
-
Page 55: Appendix 2: Remote Monitoring Ie Activex Control Installation Instruction
Appendix 2: Remote Monitoring IE ActiveX Control Installation Instruction When using IE for remote monitoring for the first time, IE ActiveX Control needs to be downloaded. 1. When remote monitoring on IE for the first time, an alert message occurs “Install ActiveX control” on the tool bar. 2. - Page 56 4. After installation, IE remote monitoring image appears. 5. If message, “Your security Settings do not allow web sites to use ActiveX controls installed on your computer.” pops on when logging in, please follow the next instruction. 6. First select “Tools” on the tool bar and then select “Internet Options”...
- Page 57 7. Select Security →Trusted Sites → Sites 8. Enter DVR address (This address is only for demonstration. Please use the address depends on the setup of on-site DVR.) into the blanks shown in picture, and then press “add.” http://213.79.36.248:80...
- Page 58 9. Newly added website will appear at the trusted web sites list. Press close. http://213.79.36.248:80 10.Go back to IE window, press refresh button or F5.