SmartWatch DVR Operation Manual
6.
You can click Refresh to get the latest status of the port mapping.
7.
Click the Apply button to save the settings.
9.2.6 Configuring Remote Alarm Host
Purpose:
With a remote alarm host configured, the device will send alarm events or exception messages to the host when
an alarm is triggered. The remote alarm host must have the CMS (Client Management System) software installed.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the More Settings tab to enter the More Settings interface.
3.
Enter Alarm Host IP and Alarm Host Port in the text fields.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client Management
System) software (e.g. SmartWatch System Manager) is installed, and the Alarm Host Port must be
the same as the alarm monitoring port configured in the software (default port is 7200).
Figure 9.17 External Port Settings Dialog Box
Figure 9.18 UPnP Settings Finished
Figure 9.19 More Settings Interface
126