Smartwatch H20SWDVR4R Operation Manual page 172

SmartWatch DVR Operation Manual
•
Operator: The Operator user level has permission to carry out Local Log Search in Local
Configuration, Remote Log Search and Two-way Audio in Remote Configuration and all
operating permissions in Camera Configuration.
•
Guest: The Guest user has permission to carry out Local Log Search in Local Configuration,
Remote Log Search in Remote Configuration and only has the local/remote playback in the
Camera Configuration.
User's MAC Address: The MAC address of the remote PC which logs onto the device. If it is
configured and enabled, it only allows the remote user with this MAC address to access the device.
4. Click the OK button to save the settings and go back to the User Management interface. The added
new user will be displayed on the list, as shown in Figure 13.7.
Figure 13.7 Added User Listed in User Management Interface
5. Select the user from the list and then click the
6. Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of the device.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
Figure 13.8 User Permission Settings Interface
171
button to enter the Permission settings interface.