Appendix Fhost Commands; Accepting Rs-232 Commands - Datalogic Magellan 3200VSI Reference Manual

Accepting RS-232 Commands

The scanner responds to the following RS-232 commands:
COMMAND
Enable Scan-
ner
Disable
Scanner
Reset Scanner
Not On File
Indication
Beep Good
Read Tone
Force Good
Read Tone
Identification
request
Health
request
Status
request
a. Call Tech Support for information.
If one of the above commands is received, the scanner will perform the steps
indicated for the command. Host commands for other interfaces are also avail-
able. Contact Tech Support for more details.
Also see the section
for details concerning that feature.
Product Reference Guide
ASCII HEX COMMENT
E 0x45
D 0x44
R 0x52
F 0x46
B 0x42 Beeps if Good Read Beep is enabled
! 0x01 Beeps regardless of beep setting
i 0x69
h 0x68
s 0x73
"Image Capture to the Host by Host Command"
Appendix F
Host Commands
Long series of beeps
a
Returns long response
a
Returns long response
a
Returns long response
on page 34
173