Recommended Use - Silicon Graphics F190 User Manual

Recommended use

Safety Precautions and Maintenance
• DO NOT OPEN THE DISPLAY. There are no user serviceable parts inside and opening or removing covers may expose
you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
• Do not spill any liquids into the cabinet or use your display near water.
• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful
or fatal or may cause electric shock, fire or equipment failure.
• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand or table, as the display may fall, causing serious damage to
the display.
• Do not place any objects onto the display and do not use the display outdoors.
• The inside of the fluorescent tube located within the LCD display contains mercury. Please follow the bylaws or rules of
your municipality to dispose of the tube properly.
Immediately unplug your display from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the display.
• If the display has been exposed to rain or water.
• If the display has been dropped or the cabinet damaged.
• If the display does not operate normally by following operating instructions.
• Do not bend power cord.
• Do not use display in high temperature, humid, dusty, or oily areas.
• Do not cover vent on display.
• If display is broken, do not come in contact with the liquid crystal.
• If glass is broken. Handle with care.
• Allow adequate ventilation around the display so that heat can properly dissipate. Do not block ventilated
openings or place the display near a radiator or other heat sources. Do not put anything on top of
display.
• The power cable connector is the primary means of detaching the system from the power supply. The
CAUTION
display should be installed close to a power outlet which is easily accessible.
• Handle with care when transporting. Save packaging for transporting.
• Image Persistence: Image persistence is when a residual or "ghost" image of a previous image remains visible on the
screen. Unlike CRT monitors, LCD monitor's image persistence is not permanent, but constant images being displayed for
a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an
image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to
erase the image.
NOTE: As with all personal display devices, Silicon Graphics recommends using a moving screen saver at regular
intervals whenever the screen is idle or turning off the monitor when not in use.
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND
USING THE LCD COLOR DISPLAY:
English-8