Check Imei; Check The Vehicle State; Reset Hardware; Set Up Terminal (Local) Time - GPS Tracker GPS303CD User Manual

25

6.29 Check IMEI

Send SMS command "imei+password" to the unit. E.g. Send SMS command
"imei123456" to the tracker device, an IMEI number of 15 digits will reply to
your cell phone.

6.30 Check the Vehicle State

Send SMS command "check+password" to the tracker device in the vehicle, It
will reply the status of the power, battery, GPS&GSM signal, GPRS status.
For example: Send SMS "check123456" to the tracker device in the vehicle, It
will reply following SMS.
Power: ON/OFF
Battery: 100%
GPRS: ON/OFF
GPS: OK/NO GPS
GSM Signal: 1-32 The higher digit it shows; the stronger of GSM signals it
receives.

6.31 Reset Hardware

Send SMS "reset+password" to tracker device, it will reply "reset ok". And
the GSM module and GPS module in the tracker will be reset

6.32 Set up Terminal (local) Time

6.32.1 Send SMS command "time+space+zone+password+space+time" to the