Baxi Solo 3 Installation And Servicing Instructions page 25

Fig. 60
Supplied By www.heating spares.co Tel. 0161 620 6677
6.0 Installation
6.12 Terminal Guard
1. When codes of practice dictate the use of
terminal guards, they can be obtained from most
plumbers and builders merchants nationwide.
2. When ordering a terminal guard, quote the
appliance model number.
3. There must be a clearance of at least 50mm
between any part of the terminal and the guard.
6.13 Fitting a Terminal Guard (Fig. 60)
1. Position the guard over the terminal on the
outside wall. Ensure the guard is equally spaced
about the terminal. Mark the fixing positions.
2. Drill and plug fixing the positions then secure
the guard to wall.
25