US Robotics 56K Series Manual page 28

Click OK. In the Select Device
5.
window your modem's model name
should appear.
Click on your modem and then click
6.
OK.
A screen will indicate that the files
7.
are being copied.
When the modem window comes up,
8.
you know that the files are copied.
Go to the Resource page.
The resource page contains the
9.
configuration information of your
modem in Windows NT. COM port,
I/O address, and Interrupt Request
Line are the three resources that may
require adjustment. The Setup
program should have detected
22
available resources and entered them.
If you want to use other settings,
change them now.
When this is complete, click OK.
10.
Please select your relevant country
11.
followed by OK.
Windows NT will indicate that there
12.
has been a "System Settings" change
and that you must restart your
computer.
Remove the installation disk or CD-
13.
ROM from the appropriate drive and
click Yes to restart the computer.
If you need to uninstall the modem, rerun
the setup.exe program from the
installation disk.