US Robotics 56K Series Manual page 25

In the "Modems Properties" screen,
8.
you should see a description of your
modem. This means the installation
was a success. Click OK.
If you do not see your modem listed, the
installation was unsuccessful. Refer to
"Plug and Play Does Not Detect Your
Modem" on page 36.
Next, click the Diagnostics tab at the
9.
top of the "Modems Properties"
screen. Write down the COM setting
for your modem in the following
space. You may need to know this
setting when you install your
communications software.
COM Port_________
You are ready to install communications
software. Refer to the manual of the
communications software for
instructions on installation.
After you install your communications
software, you are ready to use the
modem.
19