Windows Nt 4.0 Installation - US Robotics USR0756-CB Quick Installation Manual

U.s. robotics 56k pc card modem and u.s. robotics 56k pc card modem with xjack connector windows 95, 98, me, nt 4.0, 2000, and xp
Table of Contents

Advertisement

Windows NT 4.0 Installation

Note:
administrative privileges before attempting to install the modem
drivers.
Note:
computer until you complete the following installation procedure.
Turn on your computer. After you log in, insert the Installation CD-ROM into your
CD-ROM drive. Click Windows Start, Settings, and then Control Panel. Double-
click the Ports icon. Click Add. Select the next free COM Port Number (default
setting) and click OK. Click Don't Restart Now. Click Close in the Ports window.
In the Control Panel window, double-click the Modems icon. Select Don't detect
my modem. I will select from a list and click Next. Click Have Disk. Type D:\ in
the dialog box. (If your CD-ROM drive uses a different letter, type that letter in
place of D.) Click OK. Select your U.S. Robotics modem description and click
Next. Select the COM port that was added above and click Next. Click Finish to
complete the installation. Close any open windows and shut down your
computer. Insert the modem into the PC card slot, connect the phone cord, and
turn on your computer.
Note:
DOS, or Linux operating systems, refer to the User Guide on the
Installation CD-ROM included with your modem.
Congratulations! You have completed the installation of your
U.S. Robotics 56K PC Card Modem. Now register your modem.
1.
Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD
window should automatically appear. If the License Agreement window
appears, click Yes.
If the Installation CD window does not appear, click Windows Start and
then Run. Type D:\setup.exe in the "Run" dialog box. (If your CD-ROM drive
uses a different letter, type that letter in place of D.)
2.
Select Support, Registration & Warranty, and then click the URL under
Registration. Follow the on-screen instructions to complete the registration
of your modem. You may also register online at www.usr.com/productreg
6
Windows NT 4.0 users must be logged in using an account with
Do not insert your modem in the PC card slot of your notebook
For information about installing the modem in Windows 3.1,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Usr0756-xj756

Table of Contents