US Robotics 56K Series Manual page 17

expansion slot. Push down gently
until the modem snaps into the slot.
You need to apply a little pressure to
seat the modem properly. Sometimes
a gentle back and forth motion helps
fit the modem all the way into the
slot. If you feel resistance, the
modem may not be properly lined up
with the slot. Do not force it. Take
the modem all the way out and try
again.
Once the modem is inserted, fasten it
7.
firmly into place using the screw that
you removed in step 4.
Replace the cover of the computer.
8.
If you currently have a phone
9.
plugged into the wall socket you plan
to use for the modem, disconnect the
telephone cord from the socket.
The phone socket you use must be for
an ANALOGUE phone line, the line
most commonly found in homes. Most
phones in office buildings are wired
through digital lines. Be sure you
know what type of line you have. The
modem will be damaged if you use a
digital phone line.
Plug one end of the phone cord
10.
included with the modem into the
modem socket labelled
Plug the other end of the phone cord
11.
into the wall socket.
Note:
11