US Robotics 56K Series Manual page 21

Click the Windows Start button and
5.
point to Settings. Then click Control
Panel.
Double-click the Modem icon.
6.
In the "Modems Properties" screen,
7.
you should see a description of your
modem. This means the installation
was a success. Click OK.
If you do not see your modem listed, the
installation was unsuccessful. Refer to
"Plug and Play Does Not Detect Your
Modem" on page 36.
Next, click the Diagnostics tab at the
8.
top of the "Modems Properties"
screen. Write down the COM setting
for your modem in the following
space. You may need to know this
setting when you install your
communications software.
COM Port_________
Click More Info.... The modem's
9.
status screens should appear in the
box. Click OK.
If you do not see your modem's status
screens when you click More Info , the
installation was unsuccessful. Refer to
"Plug and Play Does Not Detect Your
Modem" on page 36.
You are ready to install communications
software. Refer to the manual of the
communications software for
instructions on installation.
15