Typing Commands
• In terminal mode, type commands in either upper or lower case, not a combination.
Use the Backspace key to delete errors. (You cannot delete the original AT
command because it is stored in the modem buffer.)
• If a command has numeric options and you do not include a number, zero is
assumed. For example, if you type ATB, the command ATB0 is assumed.
• Every command except A/, +++, and A> must begin with the AT prefix and be
entered by pressing ENTER.
• The maximum command length is 58 characters. This does not include the AT
prefix, carriage returns, or spaces.
All defaults are based on the &F1
when the modem is shipped. Defaults are listed in italics.
Technical Reference
Hardware Flow Control template loaded in NVRAM
57