Table of Contents
Advertisement
Permanently setting
amounts for the cup size
E If you did not fill the machine with a sufficient amount of
ground coffee,
the IMPRESSA stops the operation.
E The desired speciality coffee must be prepared within approx-
imately one minute after filling with the ground coffee.
Otherwise the IMPRESSA stops the operation and is once
more ready for use.
All speciality coffees with ground coffee are prepared following this
model.
Example: Proceed as follows to prepare one coffee using ground
coffee.
Precondition: 'Please select product:'
T Place a cup under the coffee spout.
T Open the bean container cover.
T Open the cover of the filler funnel for ground coffee.
'Please add ground coffee.'
T Place one level measuring spoon of ground coffee into the
filler funnel.
T Close the cover of the filler funnel.
'Please select product:'
T Press the
'Coffee'
Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically.
appears on the display.
It is easy to permanently adjust the amount of water and milk for all
products to the cup size. Adjust the amount once as shown in the
following example. Every time you prepare a drink in the future, this
amount will be dispensed.
The permanent settings for adapting the amounts to the cup size
for all products follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition: 'Please select product:'
'Not enough ground coffee.'
is displayed.
button.
is displayed.
2 Preparation
is displayed and
'Please select product:'
21
Advertisement
Table of Contents
