Z8 – Quick Reference Guide Z8 – Quick Reference Guide These short instructions do not replace the ‘Z8 Instructions for Use’. Make sure you read and observe the safety information and war- nings first in order to avoid hazards. Rinsing the machine You can initiate the rinse operation manually at any time.
Z8 – Quick Reference Guide Precondition: The start screen is displayed. ‘Clean the milk system’ is displayed. T Touch ‘Clean the milk system’. T Touch ‘Clean the milk system’ again. T Touch ‘Start’. T Touch ‘Start’ again. ‘Milk system cleaner’...
Page 4
T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of 250 ml cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly.
T Connect the milk pipe to the dual spout. Inserting the filter Your Z8 no longer has to be descaled if you are using the CLARIS Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows.
T Empty the drip tray and put it back into the machine. ‘Filter operation’ ‘Filter rinsing complete’ The start screen is displayed. Your Z8 is once more ready for use. Changing the filter E Once the filter cartridge stops working (depending on the water hardness setting), the Z8 will prompt you to change the filter.
Z8 – Quick Reference Guide Cleaning the machine After 180 preparations or 80 switch-on rinses, the Z8 will prompt you to clean it. CAUTION If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water.
Cleaning is now complete. The start screen is displayed. Descaling the machine The Z8 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcifica- tion depends on the hardness of your water.
Page 9
‘Pour descaling agent into water tank’ T Remove and empty the water tank. T Completely dissolve 3 JURA descaling tablets in a receptacle holding 600 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine.
T Remove the water tank. T If you use a CLARIS Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.
Need help?
Do you have a question about the Z8 and is the answer not in the manual?
Questions and answers