Wireless; Wireless Settings - TP-Link TL-WR940N User Manual

Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
IGMP Proxy - If you want to watch TV through IGMP, please Enable it.


Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login the Router.
2. If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will change accordingly at the same time，while the Virtual Server and DMZ
Host will not take effect until they are re-configured.
4.6

Wireless

Figure 4-16 Wireless menu
There are five submenus under the Wireless menu (shown in
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.
4.6.1

Wireless Settings

Choose menu "Wireless→Wireless Setting", and then you can configure the basic settings for
the wireless network on this page.
TL-WR940N/TL-WR941ND
Figure 4-17 Wireless Settings
31
450Mbps Wireless N Router
): Wireless Settings,
Figure 4-16