1.4
Panel Layout
1.4.1
The Front Panel
The Router's LEDs and the WPS button are located on the front panel (View from left to right).
Name
(Power)
(Wireless)
(Ethernet)
(Internet)
(WPS)
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
TL-WR940N/TL-WR941ND
Figure 1-1 Front Panel sketch
Status
Off
Power is off.
On
Power is on.
Off
The Wireless function is disabled.
On
The Wireless function is working properly.
There is device(s) connected to the Ethernet (1/2/3/4)
On
port(s).
Off
No device is connected to the Ethernet (1/2/3/4) port.
The Internet port is connected, and the Internet is
Blue
accessible.
The Internet port is connected, but the Internet is
Orange
inaccessible.
The Internet port isn't connected, and the Internet is
Off
inaccessible.
WPS button on the router is pressed, and the router is
Flashing
trying to connect a wireless device to its network via WPS.
On
The connection via WPS is successful.
Off
The connection via WPS fails.
Table 1-1 The LEDs description
450Mbps Wireless N Router
Indication
4