TP-Link TL-WR940N User Manual page 45

Password - You can enter ASCII characters between 8 and 63 characters or 8 to 64
•
Hexadecimal characters.
Group Key Update Period - Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2-Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security on the drop-down list. The
•
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
Encryption - You can select either Automatic, or TKIP or AES.
•

Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown in Figure 4-20
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port that radius service used.
•
Radius Password - Enter the password for the Radius Server.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a

notice in red as show in
TL-WR940N/TL-WR941ND
Figure 4-19
Figure 4-20
.
Figure 4-21
35
450Mbps Wireless N Router