TP-Link TL-WR940N User Manual page 24

If the connection type detected is PPTP/Russian PPTP, the next screen will appear as
e)
shown in Figure 3-11. Configure the following parameters and then click Next to continue.
User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
Select Dynamic IP if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
4. Wireless settings page will appear as shown in Figure 3-12. Please configure the parameters
and then click Next .
TL-WR940N/TL-WR941ND
Figure 3-11 Quick Setup – PPTP/Russia PPTP
14
450Mbps Wireless N Router