TP-Link TL-WR940N Quick Installation Manual

Quick Installation Guide
450Mbps Wireless N Router
TL-WR940N

Connecting the Hardware

If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router's Internet port, and follow Step 4 and 5 to
complete the hardware connection.
Internet
Power adapter
Power adapter
1
2
Modem
3
Router
Turn o the modem,
and remove the backup
battery if it has one.
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Turn on the modem, and
then wait about 2 minutes
for it to restart.
4
Turn on the router.
5
Verify that the hardware
connection is correct by
checking these LEDs.
Power 2.4G Internet
On On
On
Note: If the 2.4GHz LED is o , please
press and hold the Wi-Fi/WPS button on
the rear panel until the 2.4GHz LED is
on.