Local Management - TP-Link TL-WR940N User Manual


Note:
Dos Protection will take effect only when the Traffic Statistics in "System Tool →
Statistics" is enabled.
Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack

Filtering.
ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value

between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value,
the Router will startup the blocking function immediately.
Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value

between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value,
the Router will startup the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD

Attack Filtering.
TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set
value, the Router will startup the blocking function immediately.
Ignore Ping Packet from WAN Port to Router - Enable or Disable Ignore Ping Packet from

WAN Port to Router. The default setting is disabled. If enabled, the ping packet from Internet
cannot access the Router.
Forbid Ping Packet from LAN Port to Router - Enable or Disable Forbid Ping Packet from

LAN Port to Router. The default setting is disabled. If enabled, the ping packet from LAN
cannot access the Router. (Defends against some viruses).
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
4.9.3

Local Management

Choose menu "Security → Local Management", and then you can configure the management
rule in the screen as shown in Figure 4-41. The management feature allows you to deny
computers in LAN from accessing the Router.
TL-WR940N/TL-WR941ND
52
450Mbps Wireless N Router