TP-Link TL-WR940N User Manual page 29

WPS Status - Enable or disable the WPS function here.

Current PIN - The current value of the Router's PIN displayed here. The default PIN of the

Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.

Gen New PIN - Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.
Disable PIN of this device - WPS external registrar of entering this device's PIN can be

disabled or enabled manually. If this device receives multiple failed attempts to authenticate
an external registrar, this function will be disabled automatically.
Add Device - You can add the new device to the existing network manually by clicking this

button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a WPS button.
Step 1: Press the WPS/Reset button on the back panel of the router, as shown in Figure 4-3.
You can also keep the default WPS status as Enabled and click the Add device button in
. Then choose "Press the button of the new device in two minutes" and click
Figure 4-2
Connect, shown in Figure 4-4.
TL-WR940N/TL-WR941ND
Figure 4-2 WPS
19
450Mbps Wireless N Router