Changing The Knife / Knife Height (Not On 3119-10/01) - Pfaff 3119 Instruction Manual

Adjustment
13

Changing the knife / knife height (not on 3119-10/01)

.27
Changing the knife:
Knife height on machines with punching device:
Knife height on machines with cutting device:
13 - 27
Requirement
When the punching or cutting device is in its neutral position, knife 2 should be 23 mm
(punching device) or 20 mm (cutting device) away from needle plate 6.
3
6
56-061a
Fig. 13 - 23
Danger of injury from dropping knife!
Activate knife lock (move lever 1 in the direction of the arrow).
Remove and replace knife 2 (screw 3).
Set the knife height as described below.
Adjust knife 2 (screw 3) according to the requirement with the aid of adjustment gauge 4
(Part no. 61-111 635-86).
Adjust knife 5 (screw 3) according to the requirement.
1
2
6
2
4
3
5
83-047
6
56-061b