Quick Start - Microscan Mobile Hawk User Manual

Contents
Check Required Hardware ........................................................................................................... 1-2
USB Interface ............................................................................................................................... 1-3
RS-232 Interface .......................................................................................................................... 1-4
Install ESP .................................................................................................................................... 1-5
Select Model................................................................................................................................. 1-6
Select Protocol and Connect to Imager........................................................................................ 1-7
This section is designed to get your Mobile Hawk Handheld DPM Imager up and running
quickly so you can get a sense of its capabilities and test sample symbols. Detailed setup
information for configuring the imager for your specific application can be obtained in the
subsequent sections.
Your interface type will determine how data is received by your host. When sending data by
USB, you must open a text editor in your host computer. When sending data serially, you
must use a terminal program such as HyperTerminal or ESP's Terminal view (RS-232 only).
Mobile Hawk Handheld DPM Imager User's Manual

1 Quick Start

1-1