Install Esp - Microscan Mobile Hawk User Manual

Install ESP

ESP Software can be found on the Microscan Tools Drive that is packaged with the Mobile Hawk.
1. Follow the prompts to install ESP from the Tools Drive.
2. Click on the ESP icon to run the program.
Note: ESP can also be installed from the Download Center at
ESP System Requirements
• 166 MHz Pentium processor (Pentium II processor recommended)
• Windows Vista, XP, or 2000 operating system
• Internet Explorer 5.0 or higher
• 64 MB minimum RAM (128+ MB RAM recommended)
• 80 MB hard drive space
• 800 x 600 minimum 256 color display (1024 x 768 32-bit color recommended)
Important: The imager must be in one of the modes below to communicate with ESP.
USB
Connect
USB
Mode
RS-232
Connect
RS-232
Mode
Save
Settings
Mobile Hawk Handheld DPM Imager User's Manual
Quick Start
www.microscan.com.
1-5